Impco Brush-On - Godfrey ＆ Wing

About IMPCO

Whether you are an engineer, manufacturer, or DIY’er, we have a Brush-On Sealant that will work for you. Our line of sealants will repair porosity in castings, weldments, brazings, and other ferrous parts.

IMPCO, Inc. is owned by Godfrey & Wing. Godfrey & Wing is the largest vacuum impregnation equipment and sealant manufacturer in the world.

VIEW PRODUCTS

How It Works

Mix Resin

Mix two components in container supplied with kit.

Brush On Sealant

Brush on porous surfaces, and cures in the absence of air.

Wash Off

Using water, simply wash off any uncured sealant from the part’s surface.

How to Mix Resin

Mix A and B components in container supplied with kit in 1:1 ratio / 50-50% ratio

Why Brush-on Sealants?

Safe and Water Washable

No equipment and solvents are needed to remove the sealant-simply apply and remove uncured excess sealant with water.

Save Repair Time & Costs

Using IMPCO's Brush-On Sealants is one of the least expensive ways to repair porosity.

Minimize Scrap Costs

Scrap and rework costs can add up quickly. IMPCO's Brush-On Sealants allow you to salvage potentially faulty parts.

No Outside Processing Costs

No need to send the part out and wait for it to be sealed. You can apply the sealant in a short amount of time.

No Expensive Equipment

Application is as simple as just a few brush strokes.

No VOCs. 100% Solids

IMPCO's Brush-On sealants do not release any VOCs. No VOCs means nothing will be emitted that will pollute or detract the air quality.

ORDER BRUSH-ON SEALANTS ONLINE

Brush-On-Sealants Products

CastSeal™

Ideal for aluminum, iron and steel castings, brazings, and other ferrous parts

CastSeal™ is a uniquely formulated, 2 part, VOC free Brush-On Sealant™. The very low viscosity provides excellent wetting, and enables CastSeal™ to wick into pores, welds, and seams and between close-fitting aluminum, iron, and steel castings.

DOWNLOAD SAFETY DATA SHEETS ORDER NOW

ImSeal™

Ideal for macro-porosity on iron, aluminum, brass, and other metal castings and part

ImSeal™ is a uniquely formulated, 2 part epoxy based macro-porosity sealant. ImSeal™ draws beneath the surface – penetrating and filling porosity deep within the wall thickness of a casting.It fills all interconnected passageways becoming a permanent indestructible seal and is...