<img alt="" src="https://secure.gard4mass.com/158539.png" style="display:none;">

Blog

Should Vacuum Impregnation Be Done Before or After Finishing?

Posted by Andy Marin on Thu, May 02, 2019 @ 03:44 PM

Powder coat, paint, chromate conversion, or anodizing, are common finishes applied to die cast parts to improve their performance or appearance.  In some die casting applications, components must also be pressure tight to hold pressurized fluid or gases. Companies use vacuum impregnation to meet these requirements by sealing the internal leak paths without impacting any other features of the casting.

 

A common question asked about vacuum impregnation is “Should vacuum impregnation be done before or after finishing?”

Keep Reading

Search the Blog Archives

Most Popular Posts