The HVLV vacuum impregnation system allows OEMs, contract manufacturers, die casters and foundries to have the benefits of vacuum impregnation in a simple, easy to use machine. In this video, John Halladay (aka Johnny Impreg) will show you some of his favorite features on how the system efficiently and effectively seals porosity while eliminating the costs and risk of outsourcing.
Hey, Johnny Impreg here. Based on the response we got from my walk around of our CFi, I've been asked to do the same kind of video for our HVLV, it's our High Value Low Volume semi-automated impregnation system.
Here's some of my favorite features of the HVLV. Number one, it's a super small, compact footprint. It's about 96 square feet, so you can integrate it right into your manufacturing, put it right in with leak test. Second of all, it's got a super easy man-machine interface with light curtains to protect the operator at all times.
There's three modules. You got your vacuum and sealant recovery system, then you've got your wash and rinse, and your cure. And to move between modules, all you do is take the basket out, insert it, and start it with a flick of a switch. The system's PLC control being semi-automated and with the tack time of 240 seconds, you'll get about 15 jobs per hour.
I hope this information was helpful. If you have any questions, please leave questions or comments in the comments section below, or you can hit me up on WhatsApp or LinkedIn.
Thanks a lot for watching. Bye for now.