Video: Continuous Flow Impregnation System Walk Around

2 Minute Read

Godfrey & Wing's Continuous Flow Impregnation (CFi) system seals porosity in a short cycle time with minimal labor. In this video, John Halladay (aka Johnny Impreg) will show you some of his favorite features:

 

1. Compact design

2. Part traceability 

3. Integrates with production

 

 

Video Transcript

Hello, everybody. Welcome to another edition of Casting Call with Johnny Impreg. I'm your host, Johnny Impreg, and again this month, we're going to be unveiling a new piece of equipment. It seems like we just did it last month, but our equipment people have been really busy.

 

Favorite Features
This is an automated system that's going to go to an engine plant in Mexico, and it's got a couple of unique features I'd like to share with you. Number one, it's super compact, and it integrates directly in with the manufacturing facility. The blocks are fed in with an Automated Guided Vehicle (AGV). They go through the process completely automatically. They're scanned for traceability, and they go through an outbound cooling tunnel, or they go back to, with the AGV, back to a leak test. So, super small, compact, totally integrated, complete traceability, the Godfrey & Wing CFi.

 

Let's Talk
Hope you enjoyed this video. If you have any questions, please leave them in the comments below, and watch for another upcoming edition with some more machines that we'll be unveiling. Thanks for your time, and as always, bye for now.