Blog | Vacuum Impregnation Sealants

Three Ways Recoverable Vacuum Impregnation Sealants Contribute to Environmental Sustainability

Wed, Dec 08, 2021 @ 09:45 AM

As consumer demands evolve, it's imperative for companies to become environmentally conscious. As a result, OEMs and manufacturers who use aluminum...

Testing Vacuum Impregnation Sealant Compatibility vs Impregnation Process Effectiveness

Tue, Oct 06, 2020 @ 01:25 PM

There exists a misconception on testing requirements for vacuum impregnation sealants and vacuum impregnation processes. Testing impregnation...

Do Vacuum Impregnation Sealants Melt?

Tue, Sep 12, 2017 @ 08:50 AM

A question that is often asked is "Will the sealant used in vacuum impregnation melt?" This is asked by those who's castings need to withstand...

What's the Difference in Vacuum Impregnation Sealants? [Infographic]

Mon, Oct 24, 2016 @ 08:22 AM

When choosing a vacuum impregnation sealant, you have two sealants choices: thermal-cure, or anaerobic. Choosing one over the other has nothing to...

What Does It Mean When a Sealant is Qualified and Approved by MIL-I-17563C?

Mon, Mar 24, 2014 @ 11:17 AM

MIL-I-17563C is the Military Specification for cast or powder metal components. This specification is approved for use by all Departments and...

How Much Does it Cost to Impregnate a Part?

Mon, May 06, 2013 @ 02:30 PM

One of the most common questions in vacuum impregnation is how much does it cost to impregnate a part, or in other words, how much sealant will a...

How Can Vacuum Impregnation Pumps Be Protected From Sealant?

Tue, Dec 18, 2012 @ 02:34 PM

In an earlier blog article, we discussed the most common ways that sealant can get into vacuum pumps during the impregnation process. As a reminder,...

Why do I need to impregnate more than once?

Tue, Dec 04, 2012 @ 12:36 PM

There are a couple of possibilities that would require a double cycle impregnation.

What's the Difference in Anaerobic & Thermal Cure Sealants?

Thu, Nov 08, 2012 @ 11:06 AM

In the vacuum impregnation industry one of the more frequent topics of discussion surrounds the difference between anaerobic and thermal curing...

All posts